Skip to main content
Figure 2 | Nanoscale Research Letters

Figure 2

From: Theoretical Simulation on the Assembly of Carbon Nanotubes Between Electrodes by AC Dielectrophoresis

Figure 2

The electrode structure used in simulation:a parallel electrode;b comb electrode;c parallel electrode with SWCNT-bundle bridged; andd comb electrode with SWCNT-bundle bridged. The gap between the electrodes pairs for all structure is 1 μm. The width of the fingers and the space between the neighboring fingers in the comb electrode are, respectively, 100 nm and 0.3 μm

Back to article page