Skip to main content
Account
Fig. 3 | Nanoscale Research Letters

Fig. 3

From: An Ingenious Super Light Trapping Surface Templated from Butterfly Wing Scales

Fig. 3

Fabrication process from the original templates of butterfly wings to the SiO2 negative replica. a 3D nanostructured model of the original butterfly wings. b The precursor solution filled the space left between the micro-ridges with a micropipettor. c The precursor solution became solidified through heating process. d The solid negative replica was obtained after the original bio-templates were etched away and cooled at room temperature

Back to article page

Navigation