Table 4 Reported photovoltaic characteristics of the cell
Reference | Power efficiency (%) | Fill factor (%) | Short-circuit current density (μA/cm2) | Open-circuit voltage (V) | Source of illumination | Material used with SWNT |
|---|---|---|---|---|---|---|
Adnen Ltaief et al. [53] | – | 43 | 1 | 0.4 | – | Poly(2-methoxy-5-(2′-ethyl hexyloxy)1-4-phenylene vinylene) (MEH-PV) |
Kymakis et al. [54] | – | 29 | 1 | 0.55 | White light | Napthalocyanine in polyoctyl thiophene |
Raffaella et al. [55] | – | 26 | – | 0.85 | Air mass zero | Poly(3-octyl thiophene) |
Derbal-Habak et al. [56] | 2.85 | 47.2 | 9560 | 0.670 | 107 mW/cm2 | Poly(3-hexylthiophene): methanofullerene phenyl-C61-butyric acid methyl ester: before heat treatment |
Derbal-Habak et al. [56] | 3.66 | 52.2 | 11,240 | 0.668 | 107 mW/cm2 | Poly(3-hexylthiophene): methanofullerene phenyl-C61-butyric acid methyl ester: after heat treatment |