Account

Table 4 Performance parameters of the solar cells derived from J-V curves obtained in the range from forward (+1 V) to reverse (−1 V) bias, under AM1.5G solar irradiation with intensity of 1000 W m⁻²

From: Fundamental Study on the Fabrication of Inverted Planar Perovskite Solar Cells Using Two-Step Sequential Substrate Vibration-Assisted Spray Coating (2S-SVASC)

Active layer	V _oc (v)	J _sc (mA/cm²)	Fill factor (%)	PCE (%)
Run 6	0.74	14.26	52	5.08
Run 5	0.69	9.93	46	3.54
Run 10^m	0.65	4.77	42	2.34

Back to article page