Fig 9From: Modified silicas with different structure of grafted methylphenylsiloxane layerRoughness of the pellet of silica modified with PMPS using different protocol of synthesis. Figures show diagram and profile of pellet roughness for silicas obtained using protocol 1 (sample 2 obtained via scheme “M”; the PMPD/DMC ratio was equal to 5.5 at each stage, ACA of 121°), and protocol 2 (sample 5 obtained via scheme “M”; the PMPD/DMC ratio was equal to 5.5 at each stage, ACA of 131°). Studies were conducted on tablets compressed using the pressure 50 kgf/cm2 (Table 1)Back to article page