Account

Table 3 The effect of TiO₂ blocking layer by sputter deposition on the perovskite solar cell performance

From: Tailoring the Mesoscopic TiO₂ Layer: Concomitant Parameters for Enabling High-Performance Perovskite Solar Cells

Substrate	J _sc [mA cm⁻²]	V _oc [V]	FF [%]	η [%]
w/o PS	18.3	0.749	55.2	7.56
1:2	20.8	0.694	58.3	8.41

Short-circuit current density (J _sc), open-circuit voltage (V _oc), fill factor (FF), and power-conversion efficiency (η) of perovskite solar cells from w/o PS and PS/TiO₂ = 1:2. The TiO₂ blocking layer is deposited by sputtering

Back to article page