Table 1 Spinning parameters for preparing PAN and PVP nanofibers
From: Influence of Working Temperature on The Formation of Electrospun Polymer Nanofibers
No. | Working fluida | Temperature (°C) | Other conditionsb | ||
---|---|---|---|---|---|
Polymer | Solvent | Applied voltage | Flow rate | ||
F1 | PAN (Con. 15%) | DMAc (BP:166.0) | 20 ± 1 | 14 kV | 1 mL/h |
F2 | 40 ± 1 | ||||
F3 | 60 ± 2 | ||||
F4 | 80 ± 2 | ||||
F5 | PVP K90 (Con. 9%) | Ethanol (BP:78.5) | 20 ± 1 | 10 kV | 2 mL/h |
F6 | 30 ± 1 | ||||
F7 | 40 ± 1 | ||||
F8 | 50 ± 1 | ||||
F9 | 60 ± 2 |