Fig. 2From: Mechanical, Dielectric, and Spectroscopic Characteristics of “Micro/Nanocellulose + Oxide” CompositesThe XRD pattern of the starting microcellulose (SC), micro/nanocellulose (C0), cellulose-oxide micro/nanocomposites (COM/NC) with oxide concentration 0.2% (C1), 2.2% (C2), and 18.2% (C3) samples. The XRD pattern of the K2Eu(PO4)(MoO4) oxide is shown at the top of the Figure. The dotted lines are the Gauss curves approximating the contribution of the cellulose amorphous-phase into overall XRD scatteringBack to article page