Skip to main content

Advertisement

Correction to: A Graphene Oxide-Based Fluorescent Aptasensor for the Turn-on Detection of CCRF-CEM

Article metrics

  • 489 Accesses

The original article was published in Nanoscale Research Letters 2018 13:66

Correction

In the original publication of this article [1] the author Liping Zhong was omitted. In this correction article the author and the corresponding details are provided. The publisher apologizes to the readers and authors for the inconvenience.

The original publication has been corrected.

Reference

  1. 1.

    Tan J, Lai Z, Zhong L et al (2018) Nanoscale Res Lett 13:66. https://doi.org/10.1186/s11671-017-2403-3

Download references

Author information

Correspondence to Sufang Zhou or Yongxiang Zhao.

Additional information

The original article can be found online at https://doi.org/10.1186/s11671-017-2403-3

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Tan, J., Lai, Z., Zhong, L. et al. Correction to: A Graphene Oxide-Based Fluorescent Aptasensor for the Turn-on Detection of CCRF-CEM. Nanoscale Res Lett 13, 117 (2018) doi:10.1186/s11671-018-2525-2

Download citation