Table 1 Machining conditions for the 13 simulation cases of nano-scale machining
From: Nano-scale machining of polycrystalline coppers - effects of grain size and machining parameters
Case number | Depth of cut (Å) | Tool rake angle (deg) | Machining speed (m/s) | Grain size (nm) |
|---|---|---|---|---|
C1 | 15 | -30 | 400 | Monocrystal |
C2 | 15 | -30 | 400 | 16.88 |
C3 | 15 | -30 | 400 | 14.75 |
C4 | 15 | -30 | 400 | 13.40 |
C5 | 15 | -30 | 400 | 8.44 |
C6 | 15 | -30 | 400 | 6.70 |
C7 | 15 | -30 | 400 | 5.32 |
C8 | 15 | -30 | 100 | 13.40 |
C9 | 15 | -30 | 25 | 13.40 |
C10 | 10 | -30 | 400 | 13.40 |
C11 | 20 | -30 | 400 | 13.40 |
C12 | 15 | 0 | 400 | 13.40 |
C13 | 15 | 30 | 400 | 13.40 |